How do I calibrate the pressure reading on my AcuRite weather station manual?

I set up my new AcuRite weather station with such excitement, only to realize the humidity readings were completely off compared to my old analog gauge, and I had no idea how to calibrate it properly until I found the comprehensive guide online. The calibration instructions are actually quite detailed in the official documentation at https://acurite.manymanuals.com/ acurite weather station manual, and I learned that you need to let the unit stabilize for at least 24 hours before making any adjustments because the sensors are very sensitive to temperature changes from being handled during setup. After following their step-by-step calibration process which involved using a salt test for the hygrometer and comparing readings with local weather data at specific times of day, my station is now incredibly accurate and I even figured out how to set up the wireless range extender using tips from the troubleshooting section that wasn't in the quick-start guide that came in the box.

Thank you so much for the calibration guide, my AcuRite station is spot on now and I learned about features I didn't even know existed, your help means a lot to me.